Installing Your Cordless Phone
Initial Setup
Installing Your Cordless Phone
Verify Parts Received
Remove all contents from the shipping box, and check the
items received with the following list:
Desktop charging base
Handset
Modular cable *
* To ensure proper connections ... ONLY use the cable
and adaptor provided with your new Wanderer.
Connect Cables
1. Unplug the cable from
your existing wired
telephone. Plug this
cable into the charger
base jack labeled KSU.
2. Plug the modular cable
supplied with the
Wanderer into the
charging base jack labeled KTU. Plug the other end of this
cable into your existing wired telephone.
Supply Power
1. Plug the power adaptor into a wall outlet. Plug the other
end into the charging base where it is labeled DC IN 12V.
2. Turn the switch on the bottom of the Wanderer to the ON
position and place the handset in the charging base.
3. Charge your new Wanderer for 12-14 hours.
Ni-MH battery
Power adaptor *
User Guide
TO TELEPHONE
TO POWER ADAPTER
TO TELEPHONE JACK
3
Initial Setup