10
Using Your New Wanderer
C O N D I T I O N S
»
Only one call at a time may be placed on hold.
»
If multiple calls are on hold at the telephone, the
Wanderer retrieves the last call put on hold.
»
Intercom calls may be placed on hold or retrieved,
provided there are intercom flex buttons assigned on the
telephone.
MUTE Button
The Mute button may be pressed during a conversation to
disable the Wanderer microphone. This feature is useful in noisy
environments, or if a private side-conversation is desired.
While on an intercom or outside line call:
1. Press [MUTE] to disable the microphone.
2. Press [MUTE] again to enable the microphone.
The LCD will indicate Mute while function is active.
ON/OFF Button
The ON/OFF button on your Wanderer is used to answer calls
and place calls. The handset must be turned ON and removed
from the charger base.
To activate handset, press [ON/OFF]. LCD will display Search.
Once the base is located, the display will indicate Talk.
If the Wanderer is unable to find the base ... three short
beeps will sound.
MUTE Button