Yamaha P-200 Service Manual page 7

10 Power Transformer
10-1 Open the control panel unit. (see procedure 1)
10-2 Remove the four (4) screws marked [220]. The
power transformer can then be removed. (Fig. 3)
11 Speakers
11-1 Open the control panel unit. (see procedure 1)
11-2 Remove the four (4) screws marked [4]. The
speaker can then be removed. (Fig. 3)
* The right and left speakers can be removed in
the same manner.
[ 930B ]
Wheel assembly
HP assembly
[ 930A ] [ 930A ]
[ 960 ]
Power switch
Left speaker
[ 4 ]
[ 200 ]
Keyboard assembly
[4]: Bind Head Tapping Screw-P 4.0 x 30 MFZN2Y (VZ893400)
[170]: Bind Head Tapping Screw-1 3.5 x 12 MFZN2BL (EP030340)
[190]: Bind Head Screw 3.0 x 8 MFZN2Y (VD976600)
[220]: Bind Head Screw 4.0 x 12 MFZN2Y (EG340030)
[920A-G]: Bind Head Tapping Screw-B 3.0 x 6 MFZN2Y (EP600130)
[930]: Bind Head Tapping Screw-B 3.0 x 8 MFZN2BL (EP600190)
[960]: Bind Head Tapping Screw-B 4.0 x 8 MFZN2Y (EP640410)
Battery VN103500
VN103600(Battery holder for VN103500)
Notice for back-up battery removal
Push the battery as shown in figure,
then the battery will pop up.
Druk de batterij naar beneden zoals
aangeven in de tekening de batterij
springt dan naar voren.
LCD assembly
PN3 PN2
[ 920E ] [ 920D ] [ 920G ]
[ 170C ] x 4 [ 170A ] x 4
[ 170B ] x 4
[ 220 ]
[ 190A ] x 4
[ 210 ] [ 200 ]
FU60P
Power transformer
FU cover
PN1
[ 920C ]
[ 920B ] x 9 [ 920F ]
DM
[ 920A ]
[ 190B ] x 8
[ 200 ] MA cover
MA60 assembly
(Fig. 3)
Battery
Battery holder
Control panel unit
PN4
Right speaker
[ 4 ]
[ 200 ] [ 210 ] [ 200 ]
Jack unit
P-200
7