Yamaha P-200 Service Manual page 30

P-200
RX Program
Voice
Change No.
Perf. A01
13
Perf. A02
14
Perf. B11
35
Perf. B12
36
* Any Bank Select message is ignored.
3.2.4 Aftertouch
Aftertouch is not received.
3.2.5 Pitch Bend
Only the MSB of the Pitch Bend is received.
3.2.6 Channel Mode
Channel Mode messages are received.
Control Change No.
78 All Sounds Off
79 Reset all Controllers
7B All notes off
Channel Mode messages are received by the Receive channel
while Omni Off is selected.
All Sounds Off —
Reception is while Omni Off is selected only.
While Omni Off is selected, reception only occurs on the same
Receive channel, and Key On sounds are quickly silenced.
Different from All Notes Off, a dump is forcibly taken and sound is
silenced even when a damper or Sostenuto causes the sound
after a Key Off to continue or reduce slowly.
All Notes Off —
While Omni Off is selected, only those sounds that occur during
Key On in the Receive Channel are silenced. Nothing is done
while Omni On is selected.
Reset All Controllers —
While Omni Off is selected, only the Receive channel is reset to
its initial value. Nothing is done while Omni On is selected.
At reception, the status of the following items are reset to their
initial values:
Modulation Depth, Main Volume, Sustain, Soft, Sostenuto, and
Pitch Bend Depth. (Reverb Depth remains unchanged.)
Modulation Depth: Off
Sustain: Off
Sostenuto: Off
30
Parameter Value
00H
00H
00H
Main Volume: Max
Soft: Off
Pitch Bend Depth (Center)
4. SYSTEM REAL TIME MESSAGES
When Start, Continue, or Stop is assigned to PS1/2 controller,
System Realtime messages are transmitted.
5. System Exclusive Messages
5.1 Parameter Change
5.1.1 System Setup
11110000 F0
01000011 43H
0001nnnn nnnn=Device Number
00101010 2A
00100000 20
00000000 00
00000000 00
0ppppppp ppppppp=N2
00000000 00
0vvvvvvv vvvvvvv=Data Value
11110111 F7
5.1.2 Voice
11110000 F0
01000011 43
0001nnnn nnnn=Device Number
00101010 2A
00100010 22
00000000 00
00000000 00
0ppppppp ppppppp=N2
00000000 00
0vvvvvvv vvvvvvv=Data Value
11110111 F7
5.1.3 Keyboard Mode
11110000 F0
01000011 43
0001nnnn nnnn=Device Number
00101010 2A
00100110 26
00000000 00
00000000 00
0ppppppp ppppppp=N2
00000000 00
0vvvvvvv vvvvvvv=Data Value
11110111 F7
5.1.4 Controller
11110000 F0
01000011 43
0001nnnn nnnn=Device Number
00101010 2A
00100111 27
00000000 00
00000000 00
0ppppppp ppppppp=N2
00000000 00
0vvvvvvv vvvvvvv=Data Value
11110111 F7