Table of Contents
Advertisement
4
ON-SCREEN
TIMER RECORDING
PROGRAMMING
ON-SCREEN
OPERATION
18
Confirmation
~
Press the MENUM/
button,
@
Press.the numeric 2 button
Programmed
timer recordings
are listed,
Programme
priority
If several timer recordings
have overlapping
recording time, the recording with the earliest start
..
time will be recorded first, until the end,
~.,
\
19:00
20:00
21:00
22:00
23:00
1
1
I
I
1
PR
DATE
START
END
+01
23.12
15:30
76:00
P
02
25.12
10:30
11:00
$?
----.--
--:----
:---
--
-- .--
-- : --
-- : --
-
--
-- .--
-- : --
-- : --
-
--
--
--
-- : --
-- : --
-
[+1-]+SELECT
[CLEARI+CANCEL
[MENU]*TV
Tocorrect
aprogrammed
timer recording,
first
cancel it, then reprogramme
itas desired,
Tocancel
aprogrammed
timer recording,
continuewithstep
0.
Toreturn
tothenormal
TV broadcast
screen,
press the MENU~
button,
CanceHing
@
Using the (-or+)
button, select the programme
to cancel.
PR
DATE
START
END
01
23.12
15:30
16:00
V
+02
25.12
10:30
11:00
SP
--
-- . --
-- : --
-- : --
-
--
-- .--
-- : --
-- : --
-
----.
--
-- : --
-- : --
-
----
___
--:--
-- : --
-
[+/-]+sELEcT
[CLEARI+CANCEL
[MENUI+TV
@
Press the CLEAR button.
@To
return to the normal TV broadcast
screen,
pressthe
MENUTIV button,
Notes:
Ifthere is apowerfailure
duringa
timer recording,
the recording
will stop, If the power is returned to
the VCR within 60 minutes, the recording will
resume if the end time has not yet been reached,
The(g)
indicator will flash if no videocassette
is
loaded when going into timer stand-by mode.
The (B) indicator will flash and the video cassette
is ejected
if a video cassette with no
erasure-prevention
tab is loaded.
~-
These portionswill not be recorded
Please refer to "Confirmation" to check recording
times,
New Zealand only
Note on sky decoders and recording
s
There are at present two types of sky decoders
available in New Zealand.
1. Base Band Decoder (no remote control
supplied,
older type).
You cannot successfully
record G-Code
programmed
using this type of decoder,
(Unless your video is modified internally first.)
Contact Sky TV for details.
2. IRD Decoder (supplied
with Sky Remote and
with UHF output).
This decoder allows you to programme
recordings
using the G-Code function, You can
use the Sky CODE NUMBERS to record Sky TV
programmed
with your VCR, However, please
note the following limitations,
(a) The Sky CODE NUMBERS used with the
VCR can not change the channels on the Sky
Decoder,
This means you must first preselect the Sky
channel you want to record (movies, sport,
news)
(b) The VCR will then turn on and record the
programme
position which has been set for
Sky. (e.g. programme
position "4").
The Sky channel you record (movies, sport,
news) will depend on which channel the
decoder was left on.
(c) Remember the first time you use a Sky
CODE NUMBER, the programme
position
number ('(PR") on the video needs to be set
the same for all three Sky channels,
This will depend on the programme position
number you allocated for Sky in the set up. ie
programme position number "4",
.
Advertisement
Table of Contents
