Table of Contents
Advertisement
PLAYBACK
Beforestarting
Turn onthe TV, then setitto
the preset video
channel or AV mode,
Insert a recorded video cassette,
The cassette-in (n)
indicator will light,
SLOW
PRESET
00
1
STOP
II PMS&SllLL
~
01
E!mi3ml
WEWORV
RESET
Ilwx
000
~
Press the PLAYF
button,
@To
stop the playback,
press the
STOP button.
To rewind the tape, press the qREW
button.
To advance (fast-forward)
the tape, press the
FF ~
button,
To eject the video cassette, press the AEJECT
button on the VCR,
Auto power on
The power is automatically
switched on as a cassette
is inserted while the power to the VCR is turned off,
Auto play
The VCR will play back a tape automatically
when a
video cassette is inserted whose erasure-prevention
tab has been removed.
Auto eject
When a video cassette without an erasure-prevention
tab is played to the end of the tape, the tape will be
automatically
rewound and then the cassette will be
ejected.
Power off eject
The video cassette will be ejected when the
~EJECT
buflon
is pressed,
even if the power to the
VCR is turned off.
Variable playback modes
Forward search
Q
@
12
Press the FF ~
button during playback or
fast-forward
operation.
The picture can. be viewed while the tape is
advanced
at a fast speed.
Press the PLAY
button to resume normal
playback,
or the FF W
button to resume
fast-forward operation,
Reverse search
o
@
Press the ~REW
button during playback or
rewind operation,
The picture can be viewed while the tape is
rewound at a fast speed,
Press the PIJ4Y
button to resume normal
playback, or the <REW
button to resume
rewind operation.
Still picture
~
Press thellPAUSE/STILL
button during normal
playback,
A still picture can be viewed.
@
Press the PLAY>
button to resume normal
playback.
If the still picture moves up and down
Use the (- or +) button, to correct,
When noise interference
is corrected
using the (-
or +) button, the settings will be effective until the
cassette tape is unloaded,
Once the cassette
tape is unloaded,
the VCR is reset and the next
time the VCR is used you may need to do the
corrections
again.
Frame advance
~
Press thellPAUSE/ST!LL
button during still
playback to advance the picture frame by frame.
@
Press the PLAY>
button to resume normal
playback,
Slow motion
~
Press the SLOW button during normal playback
or during still picture.
The tape speed can be set at 1/5 or 1/30 of
normal speed by pressing the SLOW button.
@
Press the PLAY*
button to resume normal
playback.
Notes:
During variable playback modes the picture may
contain some noise or vibration that cannot be
corrected,
This is not a malfunction.
If still picture or slow motion playback is continued
for about five minutes, the VCR will automatically
change to stop mode in order to prevent the tape
from being damaged,
This VCR will not guarantee the variable playback
modes picture quality of tapes recorded
in LP
mode.
Advertisement
Table of Contents
