Toprevent a ccidental
erasure, r emove the
To record again, tover
the hole with vinyl
RECORDING TELEVISION BROADCASTS
Turn on the TV then set it to the preset video
channel or AV mode.
Insert a video cassette with erasure-prevention
Press the numeric buttons, or the (+ or-)
to select the TV station to be recorded.
To select the tape speed, press the SP/LP button.
SP: Standard Play mode (Best image and sound
quality. No display indicates SP mode.)
LP: Long Play mode (Twice the SP mode
The "REC" indicator will light, and recording
To stop the recording,
The cassette will automatically
be ejected if
on a video cassette without
The VCR automatically
rewinds the tape when it
reaches the end. This function does not operate with
or Quick Start Recording timer.
If you wish to avoid recording unwanted
press the 1 I PAUSE/STILL
The TV picture and sound will not be recorded.
Press the II PAUSE/STILL
button or .REC
If the record pause mode continues for about five
minutes, the VCR will automatically
go into the stop
mode in order to prevent damage to the tape.
Quick Start Recording timer
Timer recording is simple.
You can start a recording
and then programme
the VCR is automatically
and turn its power
Be sure that the set date and time are correct.
Within 10 seconds, set the recording
REC and (+ or -) buttons.
: units of 30 minutes
(+, -) : units of 1 minute
The timer indicator (D) will light after the
recording end time is set.
To stop the recording
at any time, press the
When the .REC
button is pressed during Quick
Start Recording, the recording
end time will blink for
end time can be changed
and (+ or -) buttons during this 10-second
Recording one programme
Start recording the desired TV station
selected on the VCR.
Select on the TV receiver the TV station you want