Table of Contents
Advertisement
3
BASICOPERATION
R
CH(+)
SYSTEM
PLAY
REW
FF
STOP
P;rJf:[
e
EJECT
Auto power on
The power is automatically
switched on as a cassette is
inserted while the VCR is in the
standby mode.
Auto play
The VCR will play back a tape
automatically when a video
cassette is inserted whose
erasure-prevention
tab has been
removed.
Auto eject
When a video cassette without an
erasure-prevention tab is played
to the end of the tape, the tape
will be automatically rewound
and then the cassette will be
ejected.
Power off eject
The video cassette will be ejected
when the EJECTbutton is
pressed, even when the VCR is in
standby mode.
PLAYBACK
~
Turn on the TV.
Set the TV to the video channel. If using
an AV-cable, set it to AV mode.
1
insert a recorded video cassette.
n
Cassette loading
Gently push the centre of the cassette
until it is loaded automatically.
Erasure-prevention
tab
z
Press the PLAY button.
stop
Press the STOP button.
Eject
the cassette
Press the EJECT button on the VCR.
Rewind
Press the REW button during stop or play for
reverse
search operation.
Fast-forward
Press the FF button during stop or play for
forward search operation.
Variable playback modes
Forward search
Press the FF button during playback or
fast-forward operation.
Reverse
search
Press the REW button during playback or
rewind operation.
Still picture
Press the PAUSE/STILL
button during normal
playback.
Frame advance
Press the PAUSEBTILL
button during still
picture.
A
During variable playback modes the picture
may contain some noise or vibration that
cannot be corrected. This is not a
malfunction.
If still picture playback is continued for
about five minutes, the VCR will
automatically
change to stop mode in order
to prevent the tape from being damaged.
This VCR will not guarantee the variable
playback modes picture quality of tapes.
Playback of a NTSC tape
This VCR can playback a NTSC tape on a
PAL (B/G) or NTSC 4.43 system TV.
NTSC
,
~'?iJlpAL,!l
or~g
Select the TV system on the VCR to match
the system of the TV used, as indicated below.
1
Press the SYSTEM button.
2
Press the CH (+) button.
TV system
VCR
display
i=
PAL (BIG)
NTSC4.43
3
Press the SYSTEM button.
When you playback a NTSC tape on a PAL
TV,
If the image is unstable, rolling vertically,
use the TV vertical hold button to stabilize
the image.
The image may shrink vertically and a
black band may appear at the top and
bottom of the screen.
A
A NTSC tape cannot be copied normally.
Picture quality of NTSC tapes cannot be
guaranteed
with this VCR.
It is not possible to playback a NTSC tape
of LP or EP mode.
Advertisement
Table of Contents
