Setting The Time; Saving The Power In Standby Mode - Sony LBT-GV10AV Operating Instructions Manual

Setting the time

1
Turn on the system.
2
Press c/CLOCK SET.
When you set the time for the first time,
skip to step 5.
3
Press v/V repeatedly to select "SET
CLOCK."
4
Press ENTER/NEXT.
5
Press v/V repeatedly to set the hour.
6
Press ENTER/NEXT.
The minute indication flashes.
7
Press v/V repeatedly to set the minute.
8
Press ENTER/NEXT.
The clock starts working.
Tip
If you've made a mistake or want to change the time,
start over from step 2.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Saving the power in
standby mode
Press POWER SAVE/DEMO (STANDBY)
when the power is off. Every time you
press the button, the system switches as
follows:
Power Saving Mode y Demonstration
The system is turned on/off by pressing ?/1.
Tips
• The ?/1 indicator lights up even in the Power
Saving Mode.
• The timer works in the Power Saving Mode.
• Everytime you press DISPLAY when the power is
off, the display changes as follows:
Demonstration y Clock
Note
You cannot set the time in the Power Saving Mode.
To cancel the Power Saving Mode
Press POWER SAVE/DEMO (STANDBY) to
show the demonstration.
11