Sony LBT-GV10AV Operating Instructions Manual page 10

Setting up the speakers for Dolby
Pro Logic (continued)
2
Place the center speaker so it is placed
at about the same height as the front
speakers. Align the center speaker with
the front speakers or place it a little
behind the front speakers' position.
3
Place the rear speakers facing each
other at about 60 to 90 cm above your
listening position.
60 to 90 cm
10
Rear speaker
Adjusting the speaker volume
of each speaker (Test Tone)
To enjoy Dolby Pro Logic Surround sound,
adjust the volume of each speaker using the test
tone that the system provides.
1
Press PRO LOGIC (or PRO LOGIC ON/
OFF on the remote) when the power is
on.
The button lights up.
2
Press T. TONE ON/OFF on the remote.
The test tone is heard from the speakers in
the following order.
LEFT t CENTER t RIGHT t
REAR t .....
3
From your listening position, press
CENTER LEVEL +/– and REAR LEVEL
+/– on the remote to adjust the volume
levels.
The volume levels from each speaker
should be the same.
4
Press T. TONE ON/OFF on the remote
when you are done adjusting.
The test tone is turned off.