Preparation Before Operation - Mitsubishi Electric MSD-CF09VB-H1 Operating Instructions Manual

AUTO RESTART FUNCTION
This unit has AUTO RESTART FUNCTION,but when
it is leaving factory,this function is set off.If you need
this AUTO RESTART FUNCTION,please contact with
the Service Center.Because the configuration of the
unit should be changed.
AUTO RESTART FUNCTION is...
The operation mode,set temperature and fan speed will be
memorized when using the remote controller to control the
indoor unit.If a power failure occurs during operaion,the AUTO
RESTART FUNCTION may start the unit automatically and
run it at the mode set by the remote controller before the
power is off.
INDOOR UNIT
Insert the power plug into the power outlet and turn
the breaker on.
The plug can not
be loose.
!
WARNING
Remove dirt from the power plug and insert it securely.
If dirt adheres to the plug or insertion is incomplete,it may cause
a fire or electric shock.

PREPARATION BEFORE OPERATION

REMOTE CONTROLLER
Remove the back lid and insert batteries,and
1
then reattach the front lid.
Do not confuse(+)
and(-).
2
Press the RESET button.
Press it using a thin stick.
If the RESET button is not pressed,the remote
controller may not operate correctly.
29
Insert the
c a t h o d e o f t h e
batteries in the
first.