Bluetooth; Connect A Bluetooth Headset Or Car Kit; Reconnect A Headset Or Car Kit - HTC Desire 510 User Manual

Hide thumbs Also See for Desire 510:
Table of Contents

Advertisement

 4. Touch Delete.

BLUETOOTH

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless phones. The Bluetooth communication range is
usually approximately 30 feet.

CONNECT A BLUETOOTH HEADSET OR CAR KIT

You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a
compatible Bluetooth headset or car kit.
Important: For you to listen to music with your headset, the headset must support the A2DP
Bluetooth profile.
Note: Before you connect your headset, make it discoverable so your phone can find it. Refer to
your headset manual for details.
 1. With two fingers, swipe down from the status bar to open Quick Settings.
 2. Touch the BLUETOOTH tile to turn Bluetooth on.
 3. Touch
below the BLUETOOTH tile to open the Bluetooth screen.
 4. If you don't see your headset listed, touch Scan for devices to refresh the list.
 5. When you see the name of your headset in the Available Devices section, touch the name. Your
phone pairs with the headset and the headset connection status is displayed in the Paired Devices
section.
Note: If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit name in the
Bluetooth phones section. When the Bluetooth headset or car kit is connected to your phone, the
Bluetooth connected icon

RECONNECT A HEADSET OR CAR KIT

Normally, you can easily reconnect your headset by switching on Bluetooth on your phone, and then
turning on the headset. However, you might have to connect manually if your headset has been
used with another Bluetooth device.
Important: Make sure that the headset is discoverable. Refer to the headset manual for details.
 1. With two fingers, swipe down from the status bar to open Quick Settings.
 2. Touch the BLUETOOTH tile to turn Bluetooth on.
 3. Touch
below the BLUETOOTH tile to open the Bluetooth screen.
 Tools and Calendar
is displayed in the status bar.
149

Advertisement

Table of Contents
loading

Table of Contents