Setup; Setting Up The Ls-2000 - Nikon LS-2000 User Manual

35 mm film scanner

Hide thumbs Also See for LS-2000:

Table of Contents

3. Setup

This chapter takes you step-by-step through the process of setting

up the LS-2000 and installing Nikon Scan.

This section outlines the steps involved in connecting the LS-2000

to a computer. Before using your scanner, you will need to com-

plete the following steps:

•

Step 1—Choose a location for the scanner

Before connecting the LS-2000 to your computer, choose a flat,

stable location for it, free from vibration and dust. Do not install

your scanner where:

Nikon

LS-2000 35 mm Film Scanner User's Guide

select a suitable location for the scanner

remove the transport locking screws

connect the power and SCSI cables

set the SCSI ID

• it would be exposed to direct or reflected sunlight

• it would be subject to condensation or drastic

changes in temperature

• it would be subject

to radio interference

from other electronic

devices

• the temperature

exceeds 35ºC (95ºF)

or falls below 10ºC

(50ºF)

•

other objects would block the scanner's vents

3. Setup

Table of Contents