Nikon LS-30 Reference Manual page 33

Step 3—Close the FH-2
Close the FH-2, keeping the ends of the black lower and upper
holders aligned. Fasten the snap on the FH-2 and fit the ends of
the upper and lower holders together.
Step 4—Choose the frame to be scanned
The MA-20 can scan only one frame of film at a time. Slide the
black plastic holder to align frame to be scanned with one of
the two apertures in the metal part of the FH-2.
Using the Scanner: Using the MA-20 S M A
LIDE OUNT DAPTER
Step 5—Insert the FH-2 into the slide adapter
Insert the FH-2 in the film slot of the MA-20, with the "Nikon"
logo upwards. The direction of insertion depends on which of
the frames in the apertures of the metal part of the FH-2 is to
be scanned (in the illustrations below, the arrows show the
direction of insertion).
1
4
The fourth
frame will
be scanned
The fifth
frame will
be scanned
3
The sixth
6
frame will
be scanned
The first
frame will
be scanned
The second
frame will
be scanned
2
5
The third
frame will
be scanned
- 33 -