Specifications - Nikon LS-30 Reference Manual

35mm film scanner
Hide thumbs Also See for LS-30:
Table of Contents

Advertisement

Specifications

LS-30
Film:
35 mm film
Positive and negative film, both color and
monochrome, may be used. Film may be
mounted as 35 mm slides (mounts must be
1.0 mm–3.2 mm thick) or strip film of up to
six frames.
IX240 film cartridge (with optional IA-20
adapter for IX240 film)
Scanning system: Fixed-film, movable plane-scanning single-pass
optical system
Sensor:
2592 linear-pixel CCD image sensor
Light source:
Red, green, and blue (RGB) LEDs
Color separation: Performed by RGB color LEDs
Valid scanning range:
24.3 mm x 36.5 mm, 2592 x 3894 pixels
Pixel size:
Rectilinear 11 m pixels
Optical resolution:
Maximum 2700 pixels/25.4 mm (2700 dpi) at
film surface
Analog-to-digital conversion:
10 bits for each color
Output:
Full color (8 bits for each color)
Focus:
Autofocus
Specifications
Interface:
SCSI-2 compliant, half-pitch 50-pin connec-
tors (x 2)
Dimensions:
85.5 mm (W) x 275.0 mm (D) x 142.0 mm
(H) (3.37
Weight:
Approx. 2.4 kg (5 lbs 5.7 oz)
Power supply:
100–240 VAC, 0.3–0.2 A, 50/60 Hz
Operating environment:
Operating temperature
Humidity
MA-20 S
M
LIDE
OUNT
Film:
35 mm slides, 1.0–3.2 mm thick
With FH-2
35 mm film strips of one to six frames
Operating mode: Inserted in LS-30 adapter slot
Aperture size:
Same as slide aperture (22.5 mm x 34.3 mm,
2400 x 3658 pixels)
FH-2
23.4 mm x 35.4 mm, 2496 x 3776 pixels
Dimensions:
70.3 mm (W)
(H) (2.77
Weight:
Approx. 100 g (3.6 oz.)
10.83
5.59 )
+10ºC (50ºF) to +35ºC (95ºF)
20% to 85% (no condensation)
A
DAPTER
158.0 mm (D)
49.0 mm
6.22
1.93 )
- 47 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents