Table of Contents
Advertisement
When the scanner is between other devices
Set the terminator switch on the rear of the scanner to OFF.
Connect one end of the SCSI cable to either of the connectors
on the rear of the scanner, then connect the other end to one
of the devices in the chain.
Caution:
Do not touch the connector pins with your fingers
or with metal objects, as this could result in static electricity dam-
aging one or more of the devices in the SCSI chain.
Setup: Connecting the SCSI Cable
TERMINATOR
OFF
ON
6
2
Connect a second SCSI cable to the other of the two connec-
tors on the rear of the scanner, then connect the other end of
the cable to another SCSI device. Confirm that the last device
in the chain is terminated.
Note: If the last device in the chain has an unused SCSI connec-
tor, a separate terminator should be attached to it, even if the
device is connected to the SCSI chain using a through terminator.
100–240V~
0.3–0.2A
50/60 Hz
Other SCSI device
1 0 0 0 9 8
MADE IN JAPAN
SCSI NB
TERMINATOR
4
OFF
ON
0
S C S I
S C S I
Terminator
- 24 -
Hide quick links:
Advertisement
Table of Contents
