Brother DCP-L5600DN User Manual page 640

Level 1
Wi-Fi Direct
(For wireless network
models)
NFC
(Available only for certain
models)
E-mail/IFAX
(MFC-L5700DW/
MFC-L5800DW Available
after Internet Fax (I-Fax) is
downloaded)
Level 2 Level 3
Device IP Address
Information
Status Status
Information
Signal
I/F Enable -
- -
Mail Address -
Setup Server SMTP
POP3/IMAP4
Setup Mail RX Auto Polling
Level 4 Descriptions
- View your machine's current IP
Address.
- View the current Wi-Fi Direct
network status.
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD always
indicates a strong signal.
- Turn the Wi-Fi Direct
connection on or off.
- Turn the NFC function on or off.
- Enter the email address.
(Up to 60 characters)
Server Enter the SMTP server name
and address.
Port Enter the SMTP port number.
Auth. for Select the Security method for
SMTP email notification.
SSL/TLS Send or receive an email via an
email server that requires
secure SSL/TLS
communication.
Verify Verify the SMTP Server
Cert. Certificate automatically.
Protocol Select the protocol for receiving
an email from the server.
Server Enter the server name and
address.
Port Enter the port number.
Mailbox Enter the mailbox name.
Name
(Up to 60 characters)
Mailbox Enter the password to login to
Password the server.
(Up to 32 characters)
Select Select the specified folder in
Folder the mailbox using the IMAP4
protocol.
SSL/TLS Send or receive an email via an
email server that requires
secure SSL/TLS
communication.
Verify Verify the SMTP Server
Cert. Certificate automatically.
APOP Turn APOP on or off.
Auto Check the server for new
Polling
messages automatically.
Poll Set the interval for checking
Frequency new messages on the server.
633