Table of Contents
Advertisement
Consultation, Toggle, Transfer andConference
39
Internal/External 3-Party Conference
You have made an internal or external consultation call.
If the subscriber accepts the call, you announce the conference
and select the item Conference from the "Subscriber held"
menu. The conference is initiated.
G
Press
to end the conference.
Note: Connecting the two conference participants or disconnect-
ing them singly is possible only via the corresponding menu
item.
If you want to speak to one of the participants in the conference
alone, or disconnect them singly, you select the "Conference"
menu. You can then speak to this subscriber, while the other one
is held. You can then toggle between them.
End the call with the menu item Disconnect telephone number
and then select the held subscriber.
"Conference" Menu
You have initiated a 3-party conference. Press the
softkey
Menu
briefly and select ...
Disconnect: 034565483: You disconnect the subscriber with
the phone number 034565483 from the conference (in this
example it is an external subscriber).
Disconnect: 1234: You disconnect the subscriber with the
phone number 1234 from the conference (in this example it is
an internal subscriber).
Transfer*: You disconnect yourself from the conference. The
other participants remain connected.
End conference: You end the conference and return to the idle
G
state (
also ends the conference).
Advertisement
Table of Contents
