Searching For A Specific Sequence; Intro Scan - Samsung DVD-V6800 User Manual

Searching for a Specific Sequence

Each time you record a cassette on this DVD-
VCR, an "index" is automatically marked on the
tape when recording starts. The Search function
allows you to fast-forward or rewind to a specific
index and start playback from that point.
Depending on the direction selected, the index-
es are numbered as follows:
Prev
etc. Seq.
2 1
• This DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize
any indexes marked by other VCRs using the
same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for
the 0:00:00 counter position on a cassette.
Press the CLEAR button at the point on the
tape where you want to set the counter to
0:00:00. The VCR will rewind or fast forward,
searching for the 0:00:00 counter position, and
then automatically stop at that position.
1
Press the MENU button, then press the œ or
ƒ button to select FUNC. The Function
menu is displayed. Press the OK or ‹ button.
2
Press the œ or ƒ button to select VCR
Function, then press the OK or ‹ button.
The VCR Function menu is displayed with
the Go To [0:00:00] selected.
SETUP Go To [0:00:00]
End Search
DVD

Intro Scan

VCR
PROG
FUNC
OK
• It can be displayed simply by pressing the
SEARCH button.
3
Press the OK or ‹ button again.
Downloaded From Disc-Player.com Samsung Manuals
28 - English
Seq. being Next
played Seq.
1 2
Return Menu
End Search
Use this feature when you want to search for
a blank position to record a program on a
cassette.
The VCR will fast forward, searching for a
blank position, and then automatically stop at
that position. If the VCR reaches the end of
the tape during end search, the tape will be
ejected.
1
Press the SEARCH button. The VCR
Function menu is displayed. Press the œ
etc.
or ƒ button to select End Search.
2
Press the OK or ‹ button.
Intro Scan
1
Press the SEARCH button.
The VCR Function menu is displayed.
Press the œ or ƒ button to select Intro
Scan.
2
Press the OK or ‹ button.
3
Press the ¦¦ or ‹‹ button depending
on the direction where your desired pro-
gramme is located.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
OK Return Menu
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
OK Return Menu
INTRO SCAN : ¦¦ ‹‹