Connections; Connecting Dvd-Vcr To The Tv Using The Rf Cable; Connecting Dvd-Vcr To The Tv Using The Audio/Video Cable - Samsung DVD-V6800 User Manual

C onnections
C onnections
Connecting DVD-VCR to the TV
using the RF Cable
To receive television programmes a signal
must be received from one of the following
sources:
• An outdoor aerial
• An indoor aerial
• A cable television network
• A satellite receiver
Note
•
Make sure that both the television and the
DVD-VCR are switched off before connecting
the cables.
1
Remove the aerial or network input cable
from the television.
2
Connect this cable to the 75Ω coaxial jack
marked on the rear of your DVD-VCR.
3
Plug the RF Cable supplied into
on your DVD-VCR.
4
Plug the other end of the RF Cable into the
connector previously used for the aerial on
the television.
TV
4
RF cable
Downloaded From Disc-Player.com Samsung Manuals
the jack
TV
Aerial
Aerial cable
2
3
Connecting DVD-VCR to the TV
using the Audio/Video Cable
You can connect your DVD-VCR to the tele-
vision using the Audio/Video cable if the
appropriate input is available on the televi-
sion. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your
DVD-VCR
Notes
•
Regardless of the type of connection chosen,
you must always connect the RF Cable sup-
plied. Otherwise, no picture will be visible on
the screen when the DVD-VCR is switched off.
•
M
ake sure that both the television and the
DVD-VCR are switched off before connecting
the cables.
1
Connect the RF Cable.
2
Connect one end of the Audio/Video cable
to the Video output and Audio L, R output
jack on the rear of the DVD-VCR.
3
Plug the other end into the appropriate
connector on the television.
Aerial
RF cable
ANT IN
Aerial cable
Yellow
English - 9