Searching For A Specific Sequence - Samsung DVD-V440 Instruction Manual

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an
"index" is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
Prev
Seq.
etc.
2
This DVD-VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes
marked by other VCRs using the same system
and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1
After pressing the SEARCH, press the
corresponding
[0:00:00] option is selected.
2
Press the OK or
Downloaded From Disc-Player.com Samsung Manuals
Seq. being
Next
played
Seq.
1 1 2
,
buttons, until the Go To
❷
❿
.
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.If
the VCR reaches the end of the tape during end
search, the tape will be ejected.
Intro Scan
etc.
1
After pressing the SEARCH, press the
corresponding
option is selected.
2
Press the OK or
3 ➛ ➛
Press the
direction where your desired programme is located.
4
When an Index mark is found the DVD-VCR will
playback the tape for 5 seconds, after which it will
continue searching for the next Index mark.
5
If you want to watch the tape from a particular
Index, simply press ❿ II twice.
INTRO SCAN:
,
buttons, until the Intro Scan
❷
❿
.
❿ ❿
or buttons depending on the
➛ ➛ ❿ ❿