General Operation - LENCO PDR-03 Instruction Manual

3. General Operation

Mains Adaptor (supplied with the package)
Connect the mains adaptor to the power socket on the rear panel.
Get the best reception
Extend the telescopic aerial as far as it can go.
Power on the unit
Slide the Power ON/OFF to ON to turn on the radio. The radio will
automatically operate the quick scan.
Wake up the unit
Press the SLEEP/STBY button to turn on the unit, press and hold the
same button to turn to standby mode.
Adjust the volume
Rotate the Volume Knob to adjust the volume to a comfortable level.
Listening to the radio at high volume level may destroy the hearing.
Avoid listening at high volume level for long time.
Sleep timer
To set the sleep time at power on mode, press the SLEEP button
repeatedly to select from Sleep off, 15/30/45/60/90 minutes. When
the time is out, the unit will enter standby mode.
Select modes
Press DAB/FM button to enter DAB mode or FM mode.
FIRST TIME TO TURN ON THE UNIT
Slide the Power On/Off to switch on the radio, the unit will auto-scan
the stations it found. During scanning, the screen will display a slide bar
that indicates the progress of the scan, and the amount of radio stations
that have been found so far. Once the scan has finished, the radio will
play the first station it found.
Scanning... 10
4