Getting Started - DGTEC DG-HD500PVR User Manual

GETTING STARTED

First time installation
Note: Be sure to have the power cord connected to the mains, and the toggle
switch flicked to ON.
After all the connections have been established, switch on your TV. If you are using
the STB for the first time or restored to factory default, a First Time Installation menu
will be displayed to guide you through the scanning of channels.
When finished the scanning, all active channels found will be stored automatically.
(In case you want to stop the scanning, press the EXIT key to exit. The channels
already found will be stored).
Now you are ready to watch digital TV channels and radio broadcasts.
In case you skip the First Time Installation screen, you can press MENU key to bring
up the main menu.
Switching programs
1. Press the NUMERIC keys (0~9) on the remote control to select the channel
number you want.
2. Alternatively Press the ▲/▼ key on the remote control or the front panel to
change the available channels upward/downward.
3. Press the RECALL key to view the previous channel selected.
Volume control
Press the ◄/► key on the remote control or front panel to adjust the volume.
Mute
1. Press the MUTE key to temporarily stop the sound.
2. To cancel mute, press the MUTE key again.
Freezing picture
1. Press FREEZE key to pause current program and the pause icon will appear on
screen.
2. To cancel pause and continue to play, press the FREEZE key again and the
pause icon will disappear.
After Sales Support TEL：1800 189 941
10