Setting The Seat Angle - CONCORD Neo Manual

To remove the seat frame from the chassis, pull simultaneously on the
right and left ProFix unlocking levers (06) on the seat frame and pull the
frame upwards and away from the chassis.
Tip: Various elements can be attached to the CONCORD NEO by means
of the ProFix adapter (CONCORD AIR, CONCORD SCOUT, CONCORD
SLEEPER). Some Concord accessories, available from specialist retailers,
are equipped with adapters suitable for the CONCORD NEO, making
it easy to attach them to the CONCORD NEO. Check before use that
the Concord accessory has engaged properly in the CONCORD NEO.
Please also refer to the instructions for use enclosed with the relevant
Concord accessory.
34

_ SETTING THE SEAT ANGLE

You can set the seat frame's angle of inclination to several positions.
To do this, pull the adjustment handle (12) on the top edge of the seat
frame and adjust the seat angle until it engages in the required position.
WARNING
• An additional position (P) allows the CONCORD NEO to be folded
down extra compactly, but it must be used solely for this purpose and
never for transporting a child.
35