Unfolding And Folding; Attaching And Removing The Seat Frame (Profix System) - CONCORD Neo Manual

_ UNFOLDING AND FOLDING

WARNING!
The occurrence of cutting, pressure and crushing points
during these procedures are inevitable.
To set up the CONCORD NEO,
first release the transport lock
(18) by pressing it downwards or
backwards. Then pull the handlebar
(11) upwards until you hear it
engage with a clear click.
To fold down the CONCORD NEO,
first adjust the seat angle on the
seat frame (03) to position P (see
ADJUSTING THE SEAT ANGLE).
The unlocking levers are located
on the left and right of the handle.
To unlock, press and hold the
safety button on the inside of the
left unlocking lever (14) and pull
both unlocking levers upwards.
Now push the handlebar
forwards/down until the transport
locking device engages.
32
_ ATTACHING AND REMOVING THE SEAT FRAME
(PROFIX SYSTEM)
The CONCORD NEO is equipped with ProFix adapters (16). These
adapters are used to attach the CONCORD NEO seat frame to the
chassis. You can secure the seat frame to the chassis so that it is either
front or rear facing. To do this, insert the seat frame from above into the
receivers on the chassis and let it click audibly into place.
WARNING
• Never seat your child in the seat frame until after you have secured the
frame to the chassis.
• Before using the CONCORD NEO, ensure that all fixing mechanisms
and fastenings are properly locked in position and closed.
• Never remove the seat frame from the chassis while a child is sitting in it.
• This vehicle has been designed for a single child and must not be used
for several children simultaneously.
33