Putting On, Removing And Laundering The Cover; Cleaning And Maintenance; Concord Original Spare Parts/Accessories - CONCORD Neo Manual

_ PUTTING ON, REMOVING AND LAUNDERING THE
COVER
The different parts of the cover of the CONCORD NEO are joined to
each other by means of press-studs, Velcro and zip fasteners, and are
attached to the rods. If you wish to remove the cover, first loosen all
these fastenings.
Make sure all the fasteners and connections are done up safety when
you put the cover on.
You can wipe all parts of the cover as well as the rods and the plastic
parts of the CONCORD NEO with a damp cloth.

_ CLEANING AND MAINTENANCE

To prevent corrosion, always keep the metal parts of the CONCORD
NEO clean and dry. Use silicone spray to regularly lubricate the moving
parts. Do not use oil or grease.
Only clean parts made from synthetic materials using lukewarm water
and a mild cleaning agent. Coarse contamination can be brushed off
when dry.
44

_ CONCORD ORIGINAL SPARE PARTS/ACCESSORIES

Information on Concord original spare parts/accessories is available at
your retailer's or directly from Concord.
Concord GmbH
Industriestraße 25
95346 Stadtsteinach
Germany
Phone +49 (0)9225.9550-0
Fax +49 (0)9225.9550-55
info@concord.de
www.concord.de
45