Connecting To A Computer, Printer, Or Tv; Connecting To A Computer; Before Connecting The Camera; Connecting The Usb Cable - Nikon D40 Owner's Manual

Connecting to a Computer, Printer, or TV

Connecting to a Computer

The camera can be connected to a computer using the supplied USB cable. The supplied
PictureProject software can then be used to copy photographs to the computer, where
they can be organized, retouched, and printed.

Before Connecting the Camera

Install PictureProject from the supplied installer CD. To ensure that data transfer is not inter-
rupted, be sure the camera battery is fully charged. If in doubt, charge the battery before
connecting the camera or use an optional EH-5 AC adapter and EP-5 AC adapter connector
( 103).
Before connecting the camera, select the USB item in the camera
setup menu and choose a USB option as described below.
Computer operating system
Windows XP Home Edition
Windows XP Professional
Mac OS X version 10.3.9 or later
Windows 2000 Professional
* Do select PTP. If PTP is selected when the camera is connected, the
NOT
Windows hardware wizard will be displayed. Click Cancel to exit the
wizard, and then disconnect the camera and select Mass Storage.

Connecting the USB Cable

1
Turn the computer on and wait for it to start up.
2
Turn the camera off.
3
Connect the supplied USB cable as shown. Do not use force or attempt to insert the
connectors at an angle. Connect the camera directly to the computer; do not connect
the cable via a USB hub or keyboard.
Reference: Connecting to a Computer, Printer, or TV/Connecting to a Computer 55
USB
Choose PTP or Mass Storage
Choose Mass Storage
*