Flash Compensation - Nikon D40 Owner's Manual

Flash Compensation

Controls used
Flash compensation (available only in P, S, A, and M modes) is used to alter flash output by
from –3EV to +1EV in increments of
tive to the background. Flash output can be increased to make the main subject appear
brighter, or reduced to prevent unwanted highlights or reflections.
Flash compensation is shown in the shooting information display.
Normal flash output can be restored by setting flash compensa-
tion to ±0.0. Flash exposure compensation is not reset when the
camera is turned off.
The ( ) Button
Flash compensation can also be adjusted by pressing the
buttons and rotating the command dial until the desired value is shown
in the viewfinder or shooting information display. The viewfinder display
is illustrated at right.
8—Flash Level (
Flash compensation can also be adjusted from the Custom Settings menu.
48 Reference: P, S, A, and M Modes/Exposure
1 / EV, changing the brightness of the main subject rela-
3
76)
( ) and
–3.0EV
+0.7EV