Philips PT920CC User Manual page 22

English
22
storage
There are several ways to store the shaver or to
take it with you when you travel:
- Always put the protection cap on the shaver to
prevent damage.
- Store the shaver in the pouch supplied (specific
types only).
- Store the shaver in the charging stand (specific
types only).
- Put the shaver in the Jet Clean System (specific
types only). Make sure the protection cap is not
on the shaving unit.
Note: If you do not want the shaver to charge while it is
stored it in the Jet Clean System, just leave the locking
lever in upright position
replacement
For maximum shaving performance, we advise
you to replace the shaving unit every year. Replace
damaged shaving heads right away.
Only replace the shaving heads with original HQ9
Philips Shaving Heads (for PT920CC/PT925/
PT920) or HQ8 Philips Shaving Heads (for PT870).
1 Switch off the shaver. Disconnect the shaver
from the mains, remove it from the Jet Clean
System (specific types only) or remove it from
the charging stand (specific types only).
2 Press the release button to open the shaving
unit.
3 Pull the shaving unit off the shaver.