Elation COLOUR 5 PROFILE User Manual page 19

Persnal - Stat Set - Addr DMX
When ON, define the desired DMX address via an external controller.
1. Connect the fixture to the external controller and power ON.
2. Set the DMX value of Channel 1 on the controller to (7).
3. Set the DMX value of Channel 2 on the controller to (7) or (8).
When set to (7), the DMX address can be set between (1) and (255).
When set to (8), the DMX address can be set between (256) and (511).
4. Using Channel 3 on the controller set the desired DMX address of the fixture.
Example 1:
If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel 2 to
a value of (7), and then set Channel 3 to a value of (57).
Example 2:
If the desired DMX address is 420, set Channel 1 to a value of (7), set Channel 2 to
a value of (8), and then set Channel 3 to a value of (164). (256+164=420)
5. After setting Channel 3 to the desired DMX address value, wait for approximately
20 seconds for the fixture to complete the address reset function.
Define desired DMX address via an external controller.
Persnal - Stat Set - NoDMXSta
Define how fixture operates if NO DMX signal is detected.
Persnal – Serv Set - Password
Service Password - (050)
NOTE: The Service Password MUST be entered to access the RDM PID menu.
Persnal - Disp Set – Off Time
Define how many minutes before the LCD Menu display will automatically shut OFF.
Persnal - Disp Set – Key Lock
When ON, Control Panel buttons lock automatically after exiting main menu for 15
seconds. To unlock, keep MODE/ESC button pressed for 3 seconds.
Persnal – Temp C/F
Define how fixture displays internal temperature (Cels or Fahren).
w w w . e l a t i o n l i g h t i n g . c o m
19
COLOUR 5 PROFILE™ User Manual Ver 3