Table of Contents
Advertisement
Initiate.Graphic.Adapter.[PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD][PEG/PCI]
IGD.Graphics.Mode.Select.[Enabled,.32MB]
Sets the IGD graphics mode.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled,
128MB]
DVMT.Mode.Select.[DVMT.Mode]
Allows you to select the graphics memory type.
Configuration options: [DVMT Mode]
DVMT Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
This option only appears when installing 1GB DDR2 DIMMs into the DIMM
sockets.
Protect.Audio.Video.Path.Mode.[Lite]
Allows you to set PAVP mode.
Configuration options: [Disabled] [Lite] [Paranoid]
To use the High-Bandwidth Digital Content Protection (HDCP) function, set this
option to either [Lite] or [Paranoid]. If you select Paranoid Mode, the system
reserves 96MB for playing and storing the decrypted contents. The operation
system and other programs cannot use this reserved memory, and Vista Aero
(DWM) is disabled.
Compressed video buffer is encrypted
HW 128-bit AES decryption
Protected memory (96MB reserved during boot)
5-22
Feature
PAVP.Lite
PAVP.Paranoid
Yes
Yes
Yes
Yes
No
Yes
Chapter 5: BIOS setup
Advertisement
Table of Contents
