Table of Contents
Advertisement
8..
CPU,.chassis,.and.power.fan.connectors.
(4-pin.CPU_FAN,.3-pin.CHA_FAN1,.3-pin.PWR_FAN)
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.)
or a total of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
P5QL-EM.Fan.Connectors
Only the CPU-FAN connectors support the ASUS Q-FAN feature.
9..
Serial.port.connector.(10-1.pin.COM1)
This connector is for a serial (COM) port. Connect the serial port module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
P5QL-EM.COM.Port.Connector
The serial port module is purchased separately.
4-10
CPU_FAN PWR_FAN
CHA_FAN
GND
+12V
Rotation
COM1
Chapter 4: Motherboard info
Advertisement
Table of Contents
