Auto Search; Manual Search - Teac HDR1600T User Manual

1.1 Auto Search

1.2 Manual Search

In Manual Search, you can search by selecting a predefined Channel Number. In
this mode, only one corresponding channel will be searched.
After modifying, press OK key to start searching. After Searching, system will turn to
view first searched program automatically. During the whole process, you can press
EXIT key to exit.
For beginners, Auto Search is the best choice.
First use ▲▼ Keys to select Auto Search item
in the Installation menu. Then press OK to enter
into Auto Search window. System will search
programs under Channel Edit one by one
automatically. After searching, new searched
program will be added to TV program list and
system will turn to full-screen mode to view first
searched program automatically.
During the search, you can press EXIT key to
stop or press OK key to skip. Press EXIT key
again to exit from this window.
Channel No. : Press
option among the Channel List that you can edit
in Channel Edit window.
Frequency: The value varies with what you
have selected in Channel No.
Bandwidth: Press
between 6M, 7M or 8M.
At the bottom of this window, there are two
dynamic color bars reflecting the signal's quality
and strength. You can check whether you have
set the antenna well by these two bars.
17
key to select proper
keys to choose