Denon MM212 User Manual page 37

3. Short press the Mode button to enter the "recording mode",
as shown below:
4. Short press the Play button to start recording.
Note:
The recorded sound is stored under the set current directory in the "record
stop sub-menu/main disk directory".
If the display screen shows "space full", it means that there is no available
space for storing any new record files. Please delete other files to release
some space.
If the display screen shows "directory full", it means that this directory has
99 record files. Please change the directory.
During the recording process, the unit only responds to the "Play"button.
Select the recording type
1. On the recording stop interface
2. Short press the Mode button to enter the Record sub-menu
3. Switch the Next button to select "Recording type" sub-menu item, and
short press it to access the menu:
The interface for selecting the recording type:
4. Short press the Next button to select the appropriate recording type,
and short press the Mode button to confirm your selection.
5. Press the Play button to start recording.
6. Press the Play button to pause recording, press again to resume
recording.
7. Long press Play button to save file.
Demon-MM212
37