Audio Settings - Kenwood KDC-1010U Instruction Manual

Pandora®
(for )
Search for a registered station
1 Press .
2 Turn the volume knob to select an item, then press the knob.
[BY DATE]: According to the registered date
[A-Z]: Alphabetical order
3 Turn the volume knob to select the desired station, then press
the knob.
To cancel, press and hold
(or using RC-406)
Press J / K to search for a station, then press
Bookmark current song information
Press and hold the volume knob.
"BOOKMARKED" appears and the information is stored to your
device. The bookmark is available on your Pandora account but not
on this unit.
Delete a station
While listening to PANDORA...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM], then press the knob.
3
Turn the volume knob to select [STATION DEL], then press the
knob.
4
Turn the volume knob to select [A-Z] or [BY DATE], then press
the knob.
5
Turn the volume knob to select the desired station to delete,
then press the knob.
6
Turn the volume knob to select [YES], then press the knob.
7
Press and hold to exit.
To return to the previous setting item, press
.
.
.

AUDIO SETTINGS

While listening to any source...
1
Press AUD to enter [AUDIO CONTROL] directly.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold to exit.
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to select an item, then press
2
To return to the previous setting item, press
SUB-W LEVEL –15 to +15 (0)
BASS LEVEL –8 to +8 (+2)
MID LEVEL –8 to +8 (+1)
TRE LEVEL –8 to +8 (+1)
EQ PRO (This setting is stored to [USER].)
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
MID Q FACTOR
.
.
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source. (Before making
an adjustment, select the source you want to adjust.)
60/ 80/ 100/ 200 or 60HZ/ 80HZ/ 100HZ/ 200HZ: Selects
the center frequency.
–8 to +8 (+2): Adjusts the level.
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
ON: Turns on the extended bass. ; OFF: Cancels.
0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center
frequency.
–8 to +8 (+1): Adjusts the level.
0.75/ 1.00/ 1.25: Adjusts the quality factor.
Default: XX
11
ENGLISH