Kenwood KDC-1010U Instruction Manual page 14

Cd receiver
Table of Contents

Advertisement

TROUBLESHOOTING
Symptom
Remedy
"NA FILE"
Make sure the disc contains supported audio files. (  15)
"NO DISC"
Insert a playable disc into the loading slot.
"TOC ERROR"
Make sure the disc is clean and inserted properly.
"PLEASE EJECT"
Reset the unit. If this does not solve the problem, consult
your nearest service center.
"READ ERROR"
Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
"NO DEVICE"
Connect a USB device, and change the source to USB again.
"COPY PRO"
A copy-protected file is played.
"NA DEVICE"
Connect a supported USB device, and check the connections.
"NO MUSIC"
Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
• Sound cannot
• Reconnect the Android device.
• If in [HAND MODE], launch any media player application
be heard during
playback.
on the Android device and start playback.
• Sound output only
• If in [HAND MODE], relaunch the current media player
from the Android
application or use another media player application.
• Restart the Android device.
device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. (  16)
• Make sure KENWOOD MUSIC PLAY APP is installed on the
Cannot playback at
[BROWSE MODE].
Android device. (  8)
• Reconnect the Android device and select the appropriate
control mode.
• If this does not solve the problem, the connected Android
device does not support [BROWSE MODE]. (  16)
14
Symptom
Remedy
• Switch off the developer options on the Android device.
"NO DEVICE" or
• Reconnect the Android device.
"READING" keeps
• If this does not solve the problem, the connected
flashing.
Android device does not support [BROWSE MODE].
(  16)
Playback is intermittent
Turn off the power saving mode on the Android device.
or sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
"ADD ERROR"
New station creation is unsuccessful.
"CHECK DEVICE"
Check the Pandora application on your device.
"NO SKIPS"
The skip limit has been reached.
"NO STATIONS"
No stations are found.
"STATION LIMIT"
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your device.
"CONNECT ERROR"
Communication is unstable.
"RATING ERROR"
Registration of thumbs up/thumbs down has failed due to
insufficient network connectivity.
"THUMBS N/A"
Registration of thumbs up/thumbs down is not allowed.
"LICENSE ERROR"
You try to access from a country which Pandora is not
deliverable.
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a commercial telephone accessory.
(  19, 20)
When a call comes in, "CALL" appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press
and the audio system resumes.
When the call ends, "CALL" disappears. (The audio system resumes.)
. "CALL" disappears

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents