Table of Contents
Advertisement
3.
Remove the display panel (see
4.
Remove the system board (see
5.
To remove a memory module, press outward on the two latches on each side of the SODIMM (1), then
pull the SODIMM out of the socket (2).
6.
To install a memory module, position the notch (1) correctly into the socket, slide the SODIMM into the
socket at approximately a 30° angle (2), then press the SODIMM down (3) so that the latches lock it in
place.
NOTE:
on the memory socket.
The computer automatically recognizes the additional memory when you turn on the computer.
48
Chapter 4 Removal and Replacement Procedures
Display panel on page
System board on page
A memory module can be installed in only one way. Match the notch on the module with the tab
26).
43), and then turn it over.
Hide quick links:
Advertisement
Table of Contents
