Exposure Compensation - Nikon COOLPIX S203 User Manual

Exposure Compensation

Exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.
1
Press o (exposure compensation).
The exposure compensation guide is displayed.
2
Use the multi selector to adjust exposure and
press the k button.
When the picture is too dark: adjust the exposure
compensation to "+" side.
When the picture is too bright: adjust the exposure
compensation to "–" side.
Exposure compensation can be set to values between
-2.0 and +2.0 EV.
If a setting is not applied by pressing the k button within a few seconds, the selection
will be cancelled.
3
The setting is applied.
The value is displayed with the H icon in the monitor.
C
Exposure Compensation Value
The exposure compensation value applied in A (auto) mode is stored in the camera's memory even
after the camera is turned off, and reapplied the next time A (auto) mode is selected.
D
Using Exposure Compensation
The camera tends to lower exposure when the frame is dominated by brightly lit objects and to
increase exposure when the frame is mostly dark. Positive compensation may therefore be required
to capture the brilliancy of very bright objects that fill the frame (for example, sunlit expanses of
water, sand, or snow) or when the background is much brighter than the main subject. Negative
compensation may be called for when large areas of the frame contain very dark objects (for
example, a swath of dark green leaves) or when the background is much darker than the main
subject.
32
Exposure compensation
18 18 18