Specifications; Heating Specifications; Dimensions; Epa Compliance - England's Stove Works 25-IP Installation & Operation Manual

Imperial pellet stove
Hide thumbs Also See for 25-IP:
Table of Contents

Advertisement

Heating Specifications

Heat Output Range** ................................................................. 14,108 to 35,023BTU/hr
Approximate Pellet Burn Rate** ....................................................... 0.945 to 2.346 kg/hr
Maximum Burn Time** ....................................................................................... 38 hours
Approximate Square Footage Heated*** .............................................. up to 2,200 sq. ft.
Hopper Capacity............................................................................................... 80 pounds

Dimensions

EPA and Safety Compliance Specifications
EPA Compliance .................................................................................................. Certified
Particulate Emissions ................................................................................. 1.78 grams/hr
Efficiency*.................................................................................................................. 78%
Tested To ................. UL 1482-00, ASTM E 1509, ULC/ORD-C1482-M1990 & ULC S627-00
Notes for this unit: Picture may not match your unit if you have the straight version. Clearances
are the minimum for this unit and may need to be increased in the rear to have proper vent
clearances. Follow all venting manufacturer clearances and local codes.
*- This unit was not tested for efficiency; the efficiency shown is a default value normally attained by similar, certified pellet burning appliances.
** - Heat output, burn rate and maximum burn time are heavily dependent on the type of pellets burned in the stove; as such, these numbers may vary.
*** - The maximum heating capacity of this unit can vary greatly based on climate, construction style, insulation and a myriad of other factors. Use this
information in conjunction with a BTU loss calculation for your home to determine if this unit will be sufficient for your ne eds.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING
THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT,
OR DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY

SPECIFICATIONS

5
QUESTIONS.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

55-shpip55-trpip25-ips55-shpips55-trpips

Table of Contents