D-Link DCS-2100+ Quick Installation Manual page 7

Configuring your camera with IP
Installer (continued)
Setting up your wireless configuration for the DCS-2100+
The DCS-2100+is shipped with the ability to connect to any D-Link wireless routers and
adapters by default. If the settings are changed on the other devices, then the DCS-2100+
will need to be configured to match those settings also.
Type in your SSID and Connection type
consistent with your network. (If you are
unsure, please contact your network
administrator).
Choose the channel that is the same as your
other wireless devices that you would like to
connect to.
You can choose different transmission rates to
apply if you need to restrict the camera's
bandwidth.
Preamble Type-
Preamble. The Preamble Type defines the length
of the CRC (Cyclic Redundancy Check) block
for communication between the DCS-2100+ and
roaming wireless adapters. Please see the
manual for details.
You can enable encryption here (up to
256-bit).
Click Next
select Short or Long
7