Connecting The Camera And Printer - Nikon collpix L16 User Manual

Connecting the Camera and Printer

1
Turn off the camera.
2
Turn on the printer.
Check printer settings.
3
Connect the camera to the printer using the supplied USB cable.
4
Turn on the camera.
When connected correctly, the PictBridge startup screen
1 will be displayed in the camera monitor. Then the
print selection screen will be displayed 2.
1
B
Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use
force when connecting the USB cable. When disconnecting the USB cable, do not pull the
connector at an angle.
• Do not pinch the connector cover between the camera's USB connector and the USB cable
connector when connecting the cable to the camera.
Connecting to a Printer
2
Print selection
15/05
2008
NO.
12
[ 12 ]
55