Brother ql-570 User Manual page 25

4
Remove the backing paper
cleaning sheet into the printing unit until it reaches the area shown
by an arrow in the diagram below.
•
Insert the sheet without removing the
•
Check that the printing surface of cleaning sheet is facing upwards.
5
Close the DK Roll compartment cover and press the ON/OFF
button ( ) to turn the Brother QL-570 on.
6
Press the Feed button for more
than one second.
The roller spins by 10 cm.
The adhesive face of the cleaning sheet
removes the stain or
dust on the roller.
•
If you do not press the Feed button for
more than one second, the roller spins
only 8mm.
•
Dispose of the cleaning sheet after
use.
Label outlet maintenance
If a label causes the machine to jam
due to glue attached to the label outlet,
remove the power cord and clean the
label outlet with a cloth dipped into
ethanol or isopropyl alcohol.
and feed the edge
part of sheet.
Feed button
Label outlet
of the
STEP
STEP
STEP
STEP
23
1
2
3
4