Canon Pixma MP500 Quick Start Manual page 18

Operation Panel Name and Functions
(1)
(10) (11) (12) (13) (14)
(1)
[ON/OFF]
(2) [COPY]
(3) [SCAN]*
(4) [MEMORY CARD] Switches the machine to Memory Card mode.
(5) Alarm Lamp
(6) LCD (Liquid Crystal
Display)
(7) [Menu]
(8) [Settings]
(9) [Stop/Reset]
(10) Auto Sheet Feeder
Lamp
(11) Cassette Lamp
(12) [Feed Switch]
(13) [Search]
18
Introduction
(2) (3) (4) (5)
Turns the machine ON and OFF. Before turning ON the machine, make
sure the Document Cover is closed.
Switches the machine to Copy mode. Flashes when the machine is turned
on.
Switches the machine to Scan mode. This button is used when the machine
is connected to a computer. (Refer to the Scan Guide.)
* The settings configured from MP Navigator apply when scanning from
the machine's operation panel.
If with some types of original the position and size of the image is not
scanned in correctly, please refer to "Selecting the Behavior of the
Operation Panel with MP Navigator" in the Scan Guide (On-screen
Manual) and change the MP Navigator [Document Type] and [Document
Size] to match those of the original being scanned.
Flashes orange, when an error occurs, or when paper or ink has run out.
Displays messages, menu selections, and the operation status.
Used to display menus.
Use to configure the page size, media type, and image correction settings.
Cancels operations. If this button is pressed during printing, the machine
aborts printing.
Lit when the Auto Sheet Feeder is selected.
Lit when the Cassette is selected.
Selects the paper source. Press this toggle switch to change the paper source
between the Auto Sheet Feeder and Cassette.
Looks up target photos in the memory card using the shooting date as the
search key.
(6)
(7) (8)
(15) (16) (17) (18) (19) (20)
(9)
Chapter 1