Mounting Dt92E; Separating Dt92E From Its Mounting Plate - Honeywell Y9520Z Sundial RF2 Pack 5 Installation Instructions Manual

2.4 Mounting DT92E

DT92E can be mounted (a) directly on a wall, or (b) on the optional table stand provided.
Wall mounting is recommended as it ensures a position of high signal strength can be maintained.
For wall mounting, install the mounting plate first, then follow
a.
steps 1, 2 and 3 to hinge the front piece on, as shown in the
diagrams.
1
2
2.5 Separating DT92E from its Mounting Plate (if required)
If the DT92E requires to be separated from its mounting plate, follow the simple steps shown below.
1
=
N o 6
3
3
7
If the optional table stand is to be used, first assemble the two
b.
pieces together as shown. Next follow steps 1, 2 and 3 to hinge
the DT92E front piece onto its mounting plate, and mount the unit
onto the table stand.
2