Troubleshooting For Flow Sensor Dryer - LG DGS2028EKD Service Manual

8-3 Troubleshooting for flow sensor dryer

1. FLOW SENSE indicator light is on
Is lint filter full?
No
Is duct clogged?
2. FLOW SENSE indicator light is on and does not disappear.
1. FLOW SENSE indicator light is on even when vents have been clean and even when the vents are off.
This is Normal. After flow sensor recheck full next cycle, flow sensor is reset.
(Flow sensor bars will disappear after dryer has operated two cycle)
Bars Are Displayed but Don't Disappear
*Control Panel
Avoid long runs of ducts or runs
with multiple elbows or bends.
Clean lint filter before every load
Yes
Check & clean duct.
Yes
Make sure that the ductwork is not
crushed or restricted.
Check for blockages and lint build up.
18