Care For Using Cd's - VIETA VC-HA4000BT User Manual

Note
Before mounting and operating the CD
player, remove the metal mounting sleeve
illustrated by the arrows.
Push this reset button with a cuspidal
object to renovate the distorted program
once the programis distorted.

Care for using CD'S

About CD-R/CD-R/Wdiscs:
In addition to commercially-recorded audio CD's,
this unit can play CD-R and CD-R/Wdiscs. In some
cases, particularly when recorded on older CD
burners, some CD-R and CD-R/Wdiscs may not play.
Also, whenever you are recording a CD for playback
in this receiver, it is recommended that you record
at 24x or slower speed for CD-R and 4x or slower for
CD-R/Wto achieve higher signal quality and better
playback performance.
1. To keep the disc clean:
Do not attach any sticker or adhesive tape on the
disc.
Handle the disc by its edge to keep the disc clean
and do not touch the surface.
Before playing a disc, wipe it off with a clean, dust-
free cleaning cloth.
Wipe the disc outwards fromthe disc center.
2. When one has already been inserted. Doing so
may damage the unit . Insert a disc with labeled
surface up, or it will damage the unit.
17
Remove the two screws that fix the CD deck
mechanismplayer during transportation before
mounting the player.
EJECT KEY
RESET BUTTON
3. Do not expose the disc to direct sunlight or nearby
heat sources such as heating vents, caliduct which
can cause the disc to warp.
Do not leave disc in a car if it is parked in direct
sunlight as that will lead to a considerable rise in the
temperature inside the car.
4. Do not use any secondhand or rented disc,
usually, there is glue on the surface of those discs, it
will stop the unit working and damage it.
5. Always store the disc in its case for protection.
Scratched up discs will produce poor sound
performance and cause CD player to skip.
6. In raining day or wet area, the moisture may
formon the disc or the optical parts, the playback
may not be possible. If moisture forms on the disc,
wipe it off with a soft cloth.
If moisture forms on the optical parts of the unit,
allow the unit to sit for about one hour with power on.
7. Do not use solvents such as benzine or thinners.
Commercially available cleaners or anti-static spray
will damage the unit.
CD/USB/SD Android Radio