The 6-Way Valve Has Three Hose Connection Ports - Intex Krystal Clear SF15220 Owner's Manual

SAND FILTER PUMP HOSE CONNECTION SETUP
• Keep this product more than 2m away from the pool.
• Keep this product more than 3.5m away from the pool (for France only).
• Keep the plug of this product more than 3.5m away from the pool.
• Position this product away from the pool, so as to prevent children from
climbing on it and accessing the pool.

The 6-way valve has three hose connection ports.

1. Connect one hose (12) end to the pre-filter inlet and the other end of the hose
to the lower plunger valve with the strainer. Ensure the hose nuts are securely
tightened.
2. Connect the second hose (12) between the 6-way valve water outlet and the
upper plunger valve with the inlet-nozzle. Ensure the hose nuts are securely
tighten.
3. The third hose connection port (drain/waste outlet) on the 6-way valve shall be
directed to a proper draining receptacle using a hose or pipe (not provided).
Remove the drain cap before attaching the drain/waste hose or pipe.
4. The sand filter pump is now ready to filter the pool.
WATER
INLET
TO
DRAIN
POWER
CORD
MOTOR
According to the International Standard, IEC 60364-7-702, on electrical installation
of swimming pools and other basins equipments, the following installation distances
must be respected:
• The filter pump must be position more than 2m away from the pool walls.
• The power cord plug to the 220-240 volt electrical power source of the filter
pump must be position more than 3.5 m away from the pool walls.
Check your local authorities to determine the appropriate standard and requirements
for "electrical installation of swimming pools and basins equipments". The following
table is for reference only:
Country/Region
International
France
Germany
The Netherlands
SAVE THESE INSTRUCTIONS
(162) MODEL SF15220 SAND FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 08/29/2012
WARNING
6-WAY VALVE
PLUNGER
WATER
OUTLET
L-SHAPE
O-RING
WATER INLET
L-SHAPE
O-RING
PRE-
MOTOR
FILTER
WATER
OUTLET
WATER LEVEL
VALVE
ADJUSTABLE
POOL INLET
NOZZLE
THREADED
STRAINER
CONNECTOR
OUTSIDE
LINER WALL
>2M
(ILLUSTRATION NOT TO SCALE)
Standard Number
IEC 60364-7-702
NF C 15-100-7-702
DIN VDE 0100-702
NEN 1010-702
English
162A
Page 15