Getting Ready; Controls/Settings; Selecting Settings - Envion Ionic Pro Turbo Owner's Manual

OpErATiNG THE iONiC prO TurBO

Getting Ready

Locate a level surface on which to place Ionic Pro Turbo
outlet. (Follow warnings described in the "SAFETY INSTRUCTIONS" section of this manual.) Position
your Ionic Pro Turbo ® ionic air purifier at least one foot (12 inches) from the wall. Plug in the unit.
You are now ready to turn on your Ionic Pro Turbo
1. ON/OFF Button
A LOW –output indication light (LOW)
B MEDIUM –output indication light (MED)
C HIGH –output indication light (HI)
D CLEAN –indication light (CLEAN)
2. CLEAN –wire cleaning mechanism
3. OPEN –main door button
4. CLEAN –Indication light
To view the instructional video, visit www.envionproducts.com.
The video is located on the Ionic Pro Turbo product page.
6
Air puriFiEr
®
® ionic air purifier and a grounded 120v
® ionic air purifier!
OpErATiNG THE iONiC prO TurBO

Controls/Settings

1. ON/OFF BUTTON Turns unit on and off.
A LOW –This is the most cost-effective setting. Ideal for medium sized rooms, where windows
& doors rarely open.
B MED –Recommended for medium to large-sized rooms.
C HI –This maximum output setting is recommended for medium to large rooms and/or areas
exposed to heavy dust.
D CLEAN –This red light goes on when your Ionic Pro Turbo
cleaned, or the unit is experiencing some other
problem. See "TROUBLE-SHOOTING" section.

Selecting Settings

1. Set up the Ionic Pro Turbo ® ionic air purifier as
described in "Getting Ready".
2. Press the ON/OFF button to activate your
ionic air purifier and get ready to enjoy clean,
ionized air.
3. The Ionic Pro Turbo ® ionic air purifier
automatically defaults to the HI (high/maximum
output) setting whenever the unit is turned on.
4. Just press the ON/OFF button one more time to
select the MED (medium) output setting and press
the ON/OFF button once again if you wish to select
the LOW output setting.
5. Press the ON/OFF button a fourth time to turn
the unit off.
6. The indicator LEDs light up to indicate your current
setting (LOW, MED, HI).
Clean Light:
The red CLEAN light will turn on and the unit will shut
down if cleaning is overdue or AC input is unstable.
The Ionic Pro Turbo ® ionic air purifier's collection blades
must be cleaned after every month of use and the
internal ionizing wires must be cleaned at the same
time. (See "CLEANING & MAINTENANCE" for full
directions.) Once the collection blades are properly
cleaned, normal operation should resume.
Air puriFiEr
®
® ionic air purifier needs to be
7