Advertisement
DESCRIPTION
Gemini 7057
Gemini 7057 is a compact, self-powered alarm with sensors and siren. Studied for vehicles
equipped with original transmitter and direction indicator lights flashing while opening and
closing the vehicles door.
Gemini 7056
As Gemini 7057 without self-power and engine immobilisation.
FUNCTIONS
- Control for alarm arming/disarming through the direction indicators lights and controls for the
vehicles lock actuators.
- Blinker and electronic siren.
- Perimetrical protection and volumetric protection only for Kit 7057US and Kit 7056US.
- Positive and negative control for vehicles equipped with "Pack-comfort" system.
- Engine immobilisation (only 7057).
- Negative control external additional siren.
- Automatic arming.
- Absorption sensor.
- LED's memory.
The alarm system is supplied with two mechanical keys for the emergency release.
INSTALLATION INSTRUCTIONS (for the installer).
- It is necessary to memorise the arming/disarming sequence controls through the direction indicator
lights after the wiring connections.
- The alarm wiring harness must be positioned away from the vehicle high voltage wires in order to
avoid interference which could generate wrong working of the system.
- On vehicles with catalytic converter, the engine immobilisation must be carried out on the fuel
pump.
- For systems with volumetric sensors (art. 7057US e 7056US), the transducers must be installed at
the top of each windscreen pillar, far from the ventilation or the conditioning air outputs.
- Note : to obtain the correct working of the automatic arming and perimetrical protection functions,
connect the GREEN -BROWN wire to the boot/door switches.
DIP SWITCHES PROGRAMMING TABLE
1
ON
Current absorption sensor ON
1
OFF
Current absorption sensor OFF
2
ON
Passive arming ON
2
OFF
Passive arming OFF
3
ON
Arming/disarming acoustic signalling OFF
3
OFF
Arming/disarming acoustic signalling ON
4
ON
Arming/disarming control through the direction indicator lights and the
vehicle lock actuators.
4
OFF
Arming/disarming control through the direction indicator lights.
A
: S
-
TTENTION
ELECT THE DIP
SWITCHES BEFORE TURN ING THE EMERGENCY KE Y TO
A
CCORDING TO THE RULES POSITION THE DIP
ON.
-
.1
OFF.
SWITCH N
TO
WIRING CONNECTIONS
(D
ISCONNECT THE NEGATIVE TERMINAL OF THE BATTERY AND ONLY RE
INSTALLATION IS COMPLETE
FUNCTIONS
Earth
Battery positive terminal
Engine immobilisation
Ignition live
Door pin switch
Boot/bonnet pin switch
Positive alarm armed
Sensors inlet
Negative comfort control additional siren
Positive Comfort control
Negative Comfort control
Arming/disarming control through the direction
indicator lights + Blinker.
Arming Synchronism control
Disarming Synchronism control
NOTE: connect always the synchronism controls (YELLOW-BLUE and GREEN-BLUE wires) to
the two polarity reversal wires of the L.H.S. actuators lock.
The wiring harness is supplied with two connectors; connect the 4 pin connectors to the ultrasonic
module and the two pin connector to the LED.
SELF-LEARNING FUNCTION OF THE DIRECTION INDICATOR LIGHTS
FLASHING SEQUENCES.
I
:
MPORTANT
BEFORE ACTIVATING T HE SELF
-
CORRECTLY THE DIP
SWITCHES AND TO CARRY OUT THE WIRING CONNECTIONS
TRANSMITTER BEFORE H AVING A CTIVATED THE SELF
T
HIS FUNCTION ALLOWS MEMORISING THE SEQUENCE OF THE DIRECTION INDICATOR LIGHTS
FLAHING WHILE OPENING OR CLOSING THE DOOR
To activate the self-learning function proceed as follows:
- Position the alarm key to OFF.
- Turn the ignition key to ON.
- Position the alarm key to ON.
- The LED of the alarm lights.
- Turn the ignition key to OFF.
- Close the vehicle door with the original transmitter. The LED stops lightning at the first
direction indicator lights flashing. One audible tone signals the door closure.
Note: wait always till the audible tone before learning the door opening.
- Open the vehicle door with the original transmitter. The LED stops lightning at the first
direction indicator lights flashing. Two audible tones signal the end of the self-learning
operation of the 7057 or 7056 system.
THE ACOUSTIC SIGNALLING CAN BE OBTAINED ALSO WITH THE DIP-SWITCH
N. 3 TO ON.
-
CONNECT AFTER THE
)
WIRE COLOURS
ê ê
BLACK initialled M
ê ê
BLACK initialled R
ê ê
2x GREY initialled H
ê ê
YELLOW
ê ê
GREEN-BROWN
ê ê
BLACK initialled V
ê ê
PINK
ê ê
GREEN-BLACK
ê ê
YELLOW-BLACK
ê ê
RED-BLACK
ê ê
WHITE-BLACK
ê ê
2 x ORANGE
ê ê
YELLOW-BLUE
ê ê
GREEN-BLUE
-
,
LEARNING FUNCTION
IT IS NECESSARY TO S ELECT
. D
O NOT USE THE
-
.
LEARNING FUNCTION
.
Advertisement
