Hardware.installation.-.For.wireless.router - D-Link DHP-W307AV User Manual

Section 1 - Product Overview
Hardware Installation - For Wireless Router
Note: A minimum of two PowerLine AV devices are required to create a network in order for your product to work properly.
Step 1
Plug the DHP-306AV adapter into an AC wall outlet near your router. Connect the included Ethernet cable to the network cable connector located
on the PowerLine AV Network Adapter and attach the other end of the Ethernet cable to the router.
Note:
Power source is confirmed when the green LED Power Indicator on the PowerLine AV Network Adapter is illuminated.
Step 2
Plug the PowerLine AV Wireless N Extender (DHP-W306AV) into an AC wall outlet (Please do not plug to power strip or surge protector) in the same
room in order to verify whether your home's electrical wiring is suitable for the PowerLine Network. Turn on the PowerLine AV Wireless N Extender
(DHP-W306AV) by pushing the power button located on the side of PowerLine AV Wireless N Extender (DHP-W306AV).
Note: Power source is confirmed when the green LED Power Indicator on the PowerLine AV Wireless N Extender (DHP-W306AV) is illuminated. Network Connectivity
is confirmed when the green LED PowerLine indicator on both DHP-W306AV and DHP-306AV are illuminated.
Step 3
Connect the included Ethernet cable to the network cable connector located on the PowerLine AV Wireless N Extender (DHP-W306AV) and attach
the other end of the Ethernet cable to the PC.
Your Network Setup
D-Link DHP-W307AV User Manual
Room 2 Room 1
DHP-W306AV
DHP-306AV
Wireless Router
RESET
1 2 LAN 3 4 INTERNET USB 5V - - - 3A INTERNET
15